*********************************************

LSI Corp. MegaRAID StorCLI Release 

*********************************************

Release Date: 03/03/13
========================

Supported Controllers
==================

MegaRAID SAS 9270-8i 
MegaRAID SAS 9271-4i 
MegaRAID SAS 9271-8i 
MegaRAID SAS 9271-8iCC 
MegaRAID SAS 9286-8e 
MegaRAID SAS 9286CV-8e 
MegaRAID SAS 9286CV-8eCC
MegaRAID SAS 9265-8i
MegaRAID SAS 9285-8e
MegaRAID SAS 9240-4i
MegaRAID SAS 9240-8i
MegaRAID SAS 9260-4i
MegaRAID SAS 9260CV-4i
MegaRAID SAS 9260-8i
MegaRAID SAS 9260CV-8i
MegaRAID SAS 9260DE-8i
MegaRAID SAS 9261-8i
MegaRAID SAS 9280-4i4e
MegaRAID SAS 9280-8e
MegaRAID SAS 9280DE-8e
MegaRAID SAS 9280-24i4e
MegaRAID SAS 9280-16i4e
MegaRAID SAS 9260-16i
MegaRAID SAS 9266-4i
MegaRAID SAS 9266-8i
MegaRAID SAS 9285CV-8e


Component:
=========
SAS MegaRAID StorCLI
Release Date: 03/02/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.03.11
Previous Versoin	1.02.08


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris
FreeBSD
EFI 

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
SCGCQ00339670 - (Completed) - Fixing Linux Release 1.02-00
SCGCQ00359141 - (Completed) - Fixing Linux Release 1.03.01


Installation Commands: 
=======================
Refer to the User's Guide included in the package.



=======================
Previous Releases
=======================


Component:
=========
SAS MegaRAID StorCLI
Release Date: 01/16/13


Version Numbers:	StorCLI
===============		===========			
Current Version		1.02.08 (Phase 3)
Previous Version	1.01.10 (Phase 2)


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN
Solaris
FreeBSD
EFI (EFI StorCLI version 2.5.1.02.05)

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
There were few updates in command syntaxes. 
-	See revision history in Rev E : available in Page 2 of user guide(StorCLI_Phase3_RefMan_.pdf)
-	See revision history in appendix D: available in Page 76 of user guide(StorCLI_Phase3_RefMan_.pdf)
SCGCQ00295690	MWCLI. Solaris x86 support
SCGCQ00295810	MWCLI for uEFI
SCGCQ00314895	MWCLI. FreeBSD 7.x & 8.x support
Fixes since Phase 2 Release...
SCGCQ00374892	XD1.5-StorCLI attempts to Add/remove configure/unconfigured VDs when add/removal of ALL vds is issued.
SCGCQ00355952	StorCLI : Not able to set CC scheduling beyond some limit.
SCGCQ00356883	Storcli - legacy commands related to bbu failing in multicontroller environment
SCGCQ00345353	storcli /c0/ex show status---> It is not displaying all the information of the enclosure.
SCGCQ00356970	StorCLI: The time remaining column is not populated on executing "storcli /c0 show aso" and no description for "Mode" column.
SCGCQ00358752	StorCLI: "/c0 show" command displays PD LIST table information occupying more than 80 coloumns
SCGCQ00360027	StorCli-Incorrect VD size displayed after expansion of VD size.
SCGCQ00335385	Storcli command won't display any controllers
SCGCQ00339764	StorCLI_EFI : Getting syntax error for add hotsparedrive command.
SCGCQ00343802	StorCLI_EFI : System halts on performing  RLM (Raid level Migration)  without adding/removing drives, in EFI Environment
SCGCQ00352972	StorCli- system halted on executing command " storcli /c0/f show"  in UEFI
SCGCQ00354167	StorCli- "System hang" while creating the VD using legacy command in UEFI
SCGCQ00354581	Storcli_EFI : System halts while executing lengthy commands
SCGCQ00315799	4k_DIF: Not able to Replace the missing Drive for 4K VDusing the MegaCLI -Vogel_1.0_sprint_4k Apr 11, 2012
SCGCQ00315801	Creating the 4K VD fails with firmware error description using MegaCLI -Vogel_1.0_sprint_4k
SCGCQ00316591	Storcli: Importing Foreign Configuration while Rebuild is in progress Show fall shown multiple R60 VDs
SCGCQ00316673	Storcli: Query for Phyinfo using storecli twice, will results in non-functional controller/system hang
SCGCQ00316674	Unable to set abortCConerror property on controller card using StoreCli.
SCGCQ00316675	Storcli displaying Emergency spare is No for all unconfigured drives while "enableeug" property is ON
SCGCQ00337971	StorCLI : Not able to schedule PR in EFI environment
SCGCQ00338386	StorCLI : Not able to upgrade controller firmware  without using nosigchk and noverchk in EFI Environment.
SCGCQ00338398	StorCLI: getting syntax error for pd insert command in EFI Environment
SCGCQ00341481	StorCLI - after migration the last pd is getting displayed twice( when migrating from 4pd raid 5 to 6 pd r0 )
SCGCQ00341581	Set path to new library as "export LD_LIBRARY_PATH=/usr/local/lib" after installing libgcc-3.4.6-sol10-x86-local.pkg
SCGCQ00341585	fails to log the latest set of events to the file.
SCGCQ00341991	StorCLI_EFI: Displaying "?" symbol under progress bar when PD Initialization is in progress
SCGCQ00342017	StorCLI: After a controller FW flash from StorCLI, No pending Images are seen before a reboot as seen in the legacy builds.
SCGCQ00342072	FreeBSD - Adapter cache Flush is not working .
SCGCQ00342077	storecli_EFI.storecli.efi /c0/pall set linkspeed=val   It is not displaying PHY info field .
SCGCQ00342117	StorCli does not display a help message for  "/cx/ex show status h" and storCLI  storcli /cx/ex show all h
SCGCQ00342241	StorCLI_EFI:Storcli is showing that VD expansion is possible but not allowing to expand if space is before start LBA of VD
SCGCQ00342272	StorCLI_EFI : Not able to save the configuration with Megacli syntax
SCGCQ00342670	StorCli-"enblPI/PreventPIImport" equivalent command is not their in StorCLi
SCGCQ00342693	StorCLI: A Drive spinup/spindown not successful on drives marked as hotspare as against MSM.
SCGCQ00342730	Storcli_EFI : Not getting valid JSON output for any of the commands in EFI Environment
SCGCQ00342732	StorCLI: the "set bootdrive = on" command sets the requested vd2 as bootable without user intervention.
SCGCQ00343591	StorCLI: A dedicated hot spare cannot be assigned to any one of the particular spans for a spanned DG as against MSM.
SCGCQ00343636	StorCLI allows a single Unconfigured Drive to be assigned as a dedicated hotspare to two different VD's.
SCGCQ00343799	StorCLI: Cannot explicitly assign the configured cachecade VDs to the Disk Groups for the existing CC-VD.
SCGCQ00345525	StorCLI: On performing an "add vd" with size provided in TB a decimal value is truncated to whole number as input.
SCGCQ00345557	StorCLI:  A vd can be assigned to a cachecade VD multiple times also a cachecade VD allows to be assigned to itself.
SCGCQ00345791	Storcli: not able to flash PD firmware on FreeBSD
SCGCQ00346878	Storcli: Not getting proper import preview for secured foreign VD on EFI and Solaris Environment.
SCGCQ00346917	Storcli_EFI : Not able to set securitykey on controller in EFI environment
SCGCQ00348494	StorCli-" /c0 show stoponerror" is not working
SCGCQ00350582	StorCli- "Disk Group" column is missing.
SCGCQ00353580	Storcli- "/c0/fall show" is displaying wrong.
SCGCQ00353641	StorCLI - spinup/spindown is not supported for tape drive , but executing spindown operation shows success message
SCGCQ00356700	StorCLI - legacy command adpshutdown not working properly
SCGCQ00356986	StorCLI - when " stop initialization " command is executed on a pd even when it is not in progress it is showing success
SCGCQ00357024	StorCLI - flush|flushcache showing command not supported whereas subsequent legacy command working successfully
SCGCQ00360565	In '/cx/vx show all' Active Operations = None during a Rebuild
SCGCQ00289586	Emulated Block size should be displayed as part of PD information for 512E drives
SCGCQ00316676	StorCLI help does not have the information to show the boot drive
SCGCQ00316680	FreeBSD support for MegaWare Cli
SCGCQ00318116	StorCLI2.5: "delay" & properties of "Consistency Check" does not function properly
SCGCQ00320538	iMR_Inv_MegaCli:Deb package fir MegaCli not available for Ubuntu 12.04 OS
SCGCQ00324813	MegaCLI: MFI_STAT_NOT_FOUND returns when retrieving the FW event log.
SCGCQ00326760	StorCli adpbbucmd shows next learn cycle would happen 1 day earlier for SuperCaP
SCGCQ00327419	StorCli-IN help file-"BBU show status" command is not their.
SCGCQ00327557	Storcli-"BBU show help" is not working.
SCGCQ00328182	StorCLI2.0: patrolread help description for delay is mentioned in terms of "minutes" instead of "hours"
SCGCQ00328204	StorCLI- Individual help for VD expansion does not give the completion description .
SCGCQ00328568	StorCli-"PHY Linkspeed show help/? " is not working
SCGCQ00329941	StorCli-"DRIVER VERSION" is not displaying for SWR controller  on LINUX Platform.
SCGCQ00330263	StorCli-" show  ds | safeid | rehostinfo help" is not displaying.
SCGCQ00330447	StorCli-" On VD show cc help " is not displaying
SCGCQ00335327	storcli 1.01.10 doesn't display all required enclosure info for /cx/ex show all, i.e. voltage/ps/temp/etc status/values
SCGCQ00337951	Storcli : Exit code is displayed  unnecessarily at the end of output on efi environment .
SCGCQ00337956	StorCLI: -h is not working for help display in  efi environment
SCGCQ00337967	StorCLI : getting invalid error code (out of range) while querying for invalid drive number in EFI Environment
SCGCQ00338155	StorCLI : VD's exluded from CC Scheduling is not reflected properly with /c0 show cc command in EFI Environment
SCGCQ00338194	StorCli-IN help file-"BBU show properties" command is not their.
SCGCQ00338206	StorCli- "legacy help file is not displaying"
SCGCQ00338265	StorCLI: paged view of any output should support " Press any key to continue" to proceed to next page
SCGCQ00338393	StorCLI : Date and Time of controller is not displayed in proper format in EFI Environment
SCGCQ00338576	StorCli-"Help page" last line execuite with storcli directory.
SCGCQ00339730	StorCLI_EFI : In paged output the lines following the message "Press any key to continue" should be displayed in next line.
SCGCQ00340208	code changes for some StorcliEFI-DEFECT
SCGCQ00341443	StorCLI - partial help for patrolread delay is not working
SCGCQ00341451	StorCLI - show patrolread is not showing the progress of the current patrol read in percentage
SCGCQ00341472	StorCLI - show migrate is not displaying the time since the virtual drive migration started
SCGCQ00341679	StorCLI : partial help for cc is not working ("/cx show cc h" ) . Giving syntax error
SCGCQ00342053	storecli_EFI>storecli h  It is displaying description of some commands(use only for partial help).
SCGCQ00342122	help file is not available for  "storcli dx show all h"
SCGCQ00342129	storecli_EFI> storecli.efi /c0/ex show status not displaying ALARM info field
SCGCQ00342144	StorCLI - the command "./storcli /c0 show reconrate " is displaying the migrate rate under controller prop
SCGCQ00342229	storecli_EFI> After stopping init in multiple vds ,VD status in not updating properly.
SCGCQ00342461	StorCLI doesn't show NCQ support of a SATA drive
SCGCQ00342597	StorCli-"Perfmode" value is not mentioned in the description
SCGCQ00342605	StorCLI does not prompt user intervention while deleting VD which has Boot Partition.
SCGCQ00342727	Help description for Controller Properties abbrevations like ABS, SOE is missing in cmd O/P
SCGCQ00342737	Not displaying the correct version of driver in megacli command.
SCGCQ00342997	StorCLI - not getting partial help for /cx/px set linkspeed h
SCGCQ00343108	StorCLI_EFI : Not able to disable/enable  Dimmer switch 1 with command /c2 set ds=off/on  type=4
SCGCQ00343191	StorCLI - cannot get a helpfile for "./storcli /cx set cc h "
SCGCQ00343199	StorCli-In Help File" show/set OCR" command is not their.
SCGCQ00343222	FREE BSD- Modifiaction of syntax required in help file for setting consistency check .
SCGCQ00343682	StorCLI - Syntax of set cc is given wrong in global help file
SCGCQ00343749	StorCLI: mismatch with help file for setting linkspeed with the that of the error message on setting unsupported linkspeed.
SCGCQ00343786	StorCLI -  "storcli /cx delete securitykey"when executed twice in a row shows a success status in controller properties
SCGCQ00344142	The size is in KB for "WithArrExp" instead of GB under EXPANSION INFORMATION
SCGCQ00344188	Help file not working for 'storcli /cx/vx expand ? '
SCGCQ00344707	StorCLI: 512KB Stripe size is not mentioned in CLI  help page of "storcli /cx add vd h"
SCGCQ00345311	StorCLI - "storcli /cx/pall set linkspeed = 1.5/3 ... " showing success but setting it individual is showing a comand invalid
SCGCQ00345706	./storcli /c0 set perfmode=val  ----->It is setting perfmode value other than 0 and 1
SCGCQ00345907	StorCli-" show aso " command is missing in help file.
SCGCQ00346025	./Storcli -AdpGetPciInfo -a0 ---->This command is not displaying information like bus,device,functional no. of the adapter.
SCGCQ00346919	Storcli_EFI : partial query for commands is not working with numbers like /c0 set h (works only with /cx )
SCGCQ00348538	StorCli-"Firmware Package Build" version is not showing in controller Info (UEFI)
SCGCQ00348706	StorCli-"/c0 set ds h" in help description need to some changes.
SCGCQ00349475	StorCLI: The "gas gauge" needs to be addressed under "show BBU status h"
SCGCQ00349498	StorCLI: A help file to be added for "storcli /c0/bbu start learn"
SCGCQ00351169	./storcli /c0 set securitykey=xxx passphrase=xxx ---->Description of securitykey should be display in description field.
SCGCQ00351987	Storcli : Unexpected line at output when legacy command ''Adpallinfo'' executed with page=x
SCGCQ00352560	The help file for "set backplane" needs to be revised.
SCGCQ00352571	StorCLI: "The set backplane = 0"  the command value description exceeds 80 charecters.
SCGCQ00352630	STORCLI: Command to set SOE(stop on Error) is missing in global help file
SCGCQ00352637	StorCLI: Global/Individual help missing for command to set ABS(Auto Boot Select) .
SCGCQ00352779	User guide PDF file for Technical and Documentation are required to be updated.
SCGCQ00352887	None of the build is having readme file except solaris in the storcli build ---->ver 1.02-02 Oct 23,2012
SCGCQ00353682	Storcli- Displaying incomplete foreign config even if all the drives are in Ugood state for /c0/fall show command
SCGCQ00353683	after controller firmware download completes Description is showing the firmware package version instead of firmware version
SCGCQ00354235	Storcli: StorCLI  should throw syntax error for the command /c0/dall show all all all
SCGCQ00354543	StorCLI: help legend missing for "show freespace"
SCGCQ00355107	StorCLI-Require Update of the URL mentioned in Readme File of SOLARIS11 .
SCGCQ00355116	Storcli_EFI : Showing success for  non-supported operations,  related with  association of VD to cachepool.
SCGCQ00355137	Storcli - when setting smartpollinterval to -1 , it is throwing syntax error instead of failure .
SCGCQ00355367	StorCLI- Description for what kind & range of value will be accepted by memscrubpatterns is not provided in help file
SCGCQ00355432	StorCLI : Not able to set CC execution delay if used with complete  CC scheduling command
SCGCQ00356657	Special Charecters are printed or the state info is missing under the state column of the drive.
SCGCQ00356695	StorCLI - when stop command for PD reated operations  is executed . The command description shows wrong slot id's for PD's
SCGCQ00356998	Storcli-display command when used with "page" is not showing the output correctly...
SCGCQ00357319	The "EID:Slot" is not populated on fetching information on the existing foreign configuration.
SCGCQ00357371	StorCLI: The PD list table is not sorted acoording to enclosureid:slotid.
SCGCQ00357647	storcli: cliefimain.cpp file changes for lengthy commands.
SCGCQ00357648	Storcli reports baterry is charging and discharging at the same time.
SCGCQ00359371	Storcli-"show" info need to add  abbreviation for "PDs/DGs/VDs/BBU/Y"
SCGCQ00361544	StorCli-"/c0 start pr " in failure state displaying worng 'error message'.
SCGCQ00364859	Correcting the formats of below commands (exit code ,show event log and time, date format )
SCGCQ00328185	StorCli-In legacy help file command line execute  along with" press any key to continue"-only Windows OS
SCGCQ00328531	StorCLI2.0: phy linkspeed help description is mentioned in terms of "GB" instead of "Gb/s"
SCGCQ00333006	LSI MegaCLI EncInfo (Enclosure Info) duplicates the first power supply status data to both power supplies
SCGCQ00338675	'VD ADD' should use 'strip' instead of 'stripe'.
SCGCQ00341595	StorCLI - Spelling mismatch "Alta" specified which should either be "SATA" or "ATA"
SCGCQ00342071	storcli help command with "Legacy" and "page" option doesnt display the paged help.
SCGCQ00342978	StorCli-"Phy linkspeed show all help" in description spelling mistake is their.
SCGCQ00343142	StorCli-"eccbucketleakrate" , the value should be greater than 0 and less than 65535. Help is misleading.
SCGCQ00344136	Description for option [expandarray] in command storcli /cx/v(x|all) expand Size=<xx> is not clear
SCGCQ00344150	StorCLI - partial help ( Descripton ) for command "storcli /cx /bbu show properties h " is not there
SCGCQ00344171	StorCli-"Smartpollinterval"value need to be mention in the Description.
SCGCQ00344800	Help legend is missing for properties of enclosure in O/P of ./storcli /c0/e59 show all and show cmds
SCGCQ00344994	StorCLI - "storcli /cx/vx show preservedcache " command is not present in the help file
SCGCQ00352071	Storcli_EFI : "storcli -h legacy" cmd is not working
SCGCQ00352881	Alignment text issue in the O/P of command "storcli.efi /c0 show eventlogInfo"
SCGCQ00359980	Code cleanup in Univ_viva_cli
SCGCQ00340241	StorCLI - " insert " command is not working
SCGCQ00338560	StorCLI : Driver version is not displayed correctly
SCGCQ00339757	StorCLI_EFI : Progress field for drive erase operation is displaying "?' symbol if drive erase is in progress.
SCGCQ00342762	StorCli-"Driver Version" field is missing (Free BSD 7.3)
SCGCQ00343005	StorCLI: Stripe Size of the VD is shown incorrect after a PD missing operation is performed on the disk group.
SCGCQ00346251	storcli does not report ROC temperature in '/cX show all' in HW section
SCGCQ00354427	StorCli-"System halts" on performing operation "/c0 set aso key=    " in UEFI
SCGCQ00342052	StorCLI - command "./storcli show " is throwing a description message that command is not supported
SCGCQ00343169	StorCli-"Show/set OCR help" is not Displaying
SCGCQ00344861	storecli_EFI > storecli.efi /c0 set perfmode h---> In  perfmode help file it is not giving what values we can set.
SCGCQ00346944	Storcli: Inquiry data of the drives is missing from output of  /cx/ex/sx show all command on FreeBSD with TB controller
SCGCQ00354191	Storcli - giving syntax error when trying to get help using numbers , e.g "storcli_efi /c0 h "
SCGCQ00355847	StorCli- "Serial Number" of physical Drives is not getting displayed in FreeBSD
SCGCQ00341986	StorCLI: Does not prompt the user to restart/reboot the controller after a FW flash for it to take effect as seen in MSM.
SCGCQ00348048	StorCLI: StorCLI does not provide single command to perform a locate drive configured as part of a VD as against MSM.
SCGCQ00348474	.\storCLI64.exe /c1 add vd type=r1 drives=47:1,2 ----> command is giving syntax error if using "comma" for vd creation.
SCGCQ00350579	StorCLI: The VD name cannot contain spaces as allowed in MSM.
SCGCQ00358917	EFI Shell StorCLI: Rebuild starts and does not make any progress in EFI env
SCGCQ00375019	StorCli64.exe /xd/wdall show command reports that NytroXD license is absent even when the license is available
SCGCQ00318433	Porting of Vogel 1.0 PRs to storcli phase 2.5
SCGCQ00341607	Failing to display Driver Version  in FreeBSd
SCGCQ00343664	Storcli-"Enclosure Slot No is mis matching "(DE1600-SAS )






Important Notes:
==================
STORCLI PHASE 2.0 Specific Limitations:
1.	User can use both 'raid0' and 'r0' for mentioning the raid level. And user can find both the forms in the help command.
2.	When passing parameter,'set' for CC mode is mandatory. 
3.	The use of comma in between array no and row parameter in the syntax for making pdreplacemissing should not be used.
4.	User would not be able to specify ROWs while creating Dedicated Hot Spare. Instead user needs to use Drive Group ID as dgs=N
5.	In Foreign Configuration show, utility will display VD as Foreign instead of showing the VD state.
6.	The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. Hence the success code and description is printed at the end of the log for this particular command.
7.	Any command syntax is still valid, if user uses - instead of /  for e.g. storcli.exe /c0-vall show.
8.	Show Bus and PCI Slot type are not shown as part of the controller information.
9.	While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format D:SlotID as syntax (for eg: Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices)
10.	Tape Drives will be listed only with /c0/sall show all command, /c0/sall show doesnt list Tape drive but only display the direct attached drives if present or a blank table if none are connected.
11.	Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
12.	Date and Time of controller is not displayed in proper format in EFI Environment 
13.	JSON is not required in EFI
14.	The sector size of the drives are displayed in KB instead of bytes under the PD List table. This is just display error in tabular format but it is displayed correctly in drive details.
15.	The Eid:slot column while importing a foreign config is not populated. StorCLI: The VD name cannot contain spaces as allowed in MSM.
16.	Consistency Check cannot be scheduled beyond year-2037AD.
17.	Flashing 9260CV low-level controller firmware is supported only through DOS version of CLI (MegaCLI) and not through EFI version of StorCLI.  Flashing MegaRAID firmware does not have this issue.

Known Behavior:
1.	All VD initialization command when run through StorCLI utility, shows the error message as failed for cachecaded VD. This is a generic limitation.
2.	While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message. This is a generic limitation.
3.	In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
4.	All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example  system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
5.	Output for controller information contains junk characters in VMware ESXi 4.1 update2.  
6.	FDE drives are displayed as secured drives on SWR- SCU controller.
7.	There is no check to see whether user has entered different properties or the same property multiple times in StorCLI command. Hence StorCLI  does not throw syntax error for the command /c0/dall show all all all. This issue is because of the implementation of accepting multiple properties in a single command line in some cases.


Installation Commands: 
=======================
Refer to the User's Guide included in the package.




Component:
=========
SAS MegaRAID StorCLI
Release Date: 11/06/12


Version Numbers:	StorCLI
===============		===========			
Current Version		1.01.10


Contents:
=========
This package contains StorCLI for the following OSes:
Windows
Linux
VMware
VMware MN

Use the StorCLI components from the folder that matches your OS.


Enhancements and Bug Fixes
==========================
Initial Release


Important Notes:
==================
1.  User can use both raid0 and r0 for mentioning the raid level. And user can find both the forms in the help command.
2.  When passing parameter set' for CC mode is mandatory. 
3.  The use of comma in between array no and row parameter in the syntax for making pdreplacemissing should not be used.
4.  User would not be able to specify ROWs while creating Dedicated Hot Spare. Instead user needs to use Drive Group ID as dgs=N
5.  In Foreign Configuration show, utility will display VD as Foreign instead of showing the VD state.
6.  The success code and description is printed only after complete processing of the command. Success will not be printed unless the entire log is displayed to the output. The success code and description is printed at the end of the log for this particular command.
7.  Any command syntax is still valid, if user uses - instead of /  (e.g. storcli.exe /c0-vall show.)
8.  Show Bus and PCI Slot type are not shown as part of the controller information.
9.  While creating a VD using non-Enc-ID Devices, user needs to provide inputs in the format D:SlotID as syntax (e.g. Drives=D:1,2,3 where 1,2,3 are the slot ids of the non encID devices.)
10. Tape Drives will be listed only with /c0/sall show all command. /c0/sall show doesnt list Tape drive but only displays the direct attached drives if present or a blank table if none are connected.
11. Importing Foreign Configuration while Rebuild is in progress then query for Show fall the output would display multiple R60 VDs.
12. For any operation (Migrate/Init/BGI/CC) percentile completed in minutes is not displayed in StorCLI output. 
13. All VD initialization command when run through StorCLI utility, shows the error message as failed for cachecaded VD.
14. While reconstruction is in progress, start of CC/Init/BGI operations on same VD throws an inappropriate error message.
15. In controller show cc the field CC current state will change only when it meets the schedule CC parameters.
16. All the unsupported commands for SWR controller if tried to execute may result in unknown behavior for example  system hang-up. For the list of unsupported commands refer to user guide Appendix C: Unsupported Commands in Embedded RAID.
17. Output for controller information contains junk characters in VMware ESXi 4.1 update2.  
18. FDE drives are displayed as secured drives on SWR- SCU controller.



Installation Commands: 
=======================
Refer to the User's Guide included in the package.



