<ServiceCallsCfg>
	<!--ServiceCallsCfg-->
	<SMTPServer>
		<!--SMTPServer-->
		<!-- Example: -->
		<!-- 1. <ServerURI>smtp://example.com</ServerURI> or <ServerURI>smtps://example.com</ServerURI>
			 2. <ServerURI>Smtp://8.8.8.8</ServerURI><ServerPort>25</ServerPort><SenderEmail>Username@example.com</SenderEmail><SenderID>example/Username</SenderID><SenderPW>abcd!1234</SenderPW>-->
		<ServerURI></ServerURI>
		<ServerPort></ServerPort>
		<!--Supported SMTP protocol: SMTP,SMTP SSL,SMTP STARTTLS-->
		<!--Known SUM Supported Port: 25,465,587 -->
		<SenderEmail></SenderEmail>
		<SenderID></SenderID>
		<SenderPW></SenderPW>
	</SMTPServer>
	<Trigger_Items>
		<!--Trigger Items-->
		<!--WARNING: CMM system only supports SDR trigger items-->
		<SDR_Trigger_Items Action="Enable"></SDR_Trigger_Items>
		<!--Supported Action: Enable/Disable-->
		<!--SDR Trigger Items will be automatically configured if Action value is "Enable". -->
		<SEL_Trigger_Items Action="Enable">
			<!--Supported values: Enable/Disable-->
			<!--SEL:HDD(OEM), CPLD(OEM), CPU(OEM), BIOS OEM(Memory Error)-->
			<!--    NVMe(OEM), SMBIOS error(OEM), Processor Configuration(OEM)-->
			<!--    Processor, Management, Battery, Memory, OEM Driver Slot-->
			<!--    Broadcom RAID controller status, Broadcom RAID controller's BBU status-->
			<!--WARNING: Attribution in each element is read-only. User can only change the element content of each node, i.e. Trigger/Skip.-->
			<HDD_OEM>
				<!--HDD(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<SMART1 Description="Disk SMART failure" Severity="Critical/Information">Trigger</SMART1>
			</HDD_OEM>
			<CPLD_OEM>
				<!--CPLD(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<MEM_EVENT1 Description="MEM EVENT GH" Severity="Critical/Information">Trigger</MEM_EVENT1>
				<MEM_EVENT2 Description="MEM EVENT EF" Severity="Critical/Information">Trigger</MEM_EVENT2>
				<MEM_EVENT3 Description="MEM EVENT CD" Severity="Critical/Information">Trigger</MEM_EVENT3>
				<MEM_EVENT4 Description="MEM EVENT AB" Severity="Critical/Information">Trigger</MEM_EVENT4>
				<PROCHOT1 Description="PROCHOT P2" Severity="Critical/Information">Trigger</PROCHOT1>
				<PROCHOT2 Description="PROCHOT P1" Severity="Critical/Information">Trigger</PROCHOT2>
				<MEMCHOT1 Description="MEMCHOT P2" Severity="Critical/Information">Trigger</MEMCHOT1>
				<MEMCHOT2 Description="MEMCHOT P1" Severity="Critical/Information">Trigger</MEMCHOT2>
				<VRHOT1 Description="VRHOT P2" Severity="Critical/Information">  Trigger</VRHOT1>
				<VRHOT2 Description="VRHOT P1" Severity="Critical/Information">  Trigger</VRHOT2>
				<VRHOT3 Description="VRHOT GH" Severity="Critical/Information">  Trigger</VRHOT3>
				<VRHOT4 Description="VRHOT EF" Severity="Critical/Information">  Trigger</VRHOT4>
				<VRHOT5 Description="VRHOT CD" Severity="Critical/Information">  Trigger</VRHOT5>
				<VRHOT6 Description="VRHOT AB" Severity="Critical/Information">  Trigger</VRHOT6>
				<CATERR Description="CATERR" Severity="Critical/Information">   Trigger</CATERR>
			</CPLD_OEM>
			<CPU_OEM>
				<!-- CPU(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<CPU1 Description="CPU1 Error" Severity="Critical/Information">Trigger</CPU1>
				<CPU2 Description="CPU2 Error" Severity="Critical/Information">Trigger</CPU2>
				<CPU3 Description="CPU3 Error" Severity="Critical/Information">Trigger</CPU3>
				<PCH Description="PCH Hot" Severity="Critical/Information">   Trigger</PCH>
			</CPU_OEM>
			<BIOS_OEM_Memory_Error>
				<!-- BIOS OEM(Memory Error)-->
				<!--Supported content: Trigger/Skip-->
				<Memory_Error1 Description="Uncorrectable error found, Memory Rank is disabled" Severity="Warning/Information">Trigger</Memory_Error1>
				<Memory_Error2 Description="Incorrect memory DIMM population" Severity="Warning/Information">Trigger</Memory_Error2>
				<Memory_Error3 Description="Failing DIMM: DIMM location(Correctable memory component found)" Severity="Warning/Information">Trigger</Memory_Error3>
				<Memory_Error4 Description="Failing DIMM: DIMM location(Uncorrectable memory component found)" Severity="Warning/Information">Trigger</Memory_Error4>
				<Memory_Error5 Description="No memory DIMM detected, install memory DIMMs" Severity="Critical/Information">Trigger</Memory_Error5>
				<Memory_Error6 Description="Incorrect memory DIMM population, check Memory Population Rule" Severity="Critical/Information">Trigger</Memory_Error6>
				<Memory_Error7 Description="Memory initialization panic, apply AC Reset" Severity="Critical/Information">Trigger</Memory_Error7>
				<Memory_Error8 Description="DIMM mapped Out" Severity="Critical/Information">Trigger</Memory_Error8>
			</BIOS_OEM_Memory_Error>
			<NVMe_OEM>
				<!-- NVMe(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<NVMe_BPN Description="NVMeBPN drive fault" Severity="Warning/Information">Trigger</NVMe_BPN>
			</NVMe_OEM>
			<SMBIOS_error_OEM>
				<!-- SMBIOS error(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<SMBIOS_error1 Description="SMBIOS error-Pci Parity Error" Severity="Critical/Information">Trigger</SMBIOS_error1>
				<SMBIOS_error2 Description="SMBIOS error-Pci system Error" Severity="Critical/Information">Trigger</SMBIOS_error2>
			</SMBIOS_error_OEM>
			<Processor_Configuration_OEM>
				<!--Processor Configuration(OEM)-->
				<!--Supported content: Trigger/Skip-->
				<BUS_Error1 Description="Bus Correctable Error" Severity="Warning/Information">Trigger</BUS_Error1>
				<BUS_Error2 Description="Bus Fatal Error" Severity="Critical/Information">Trigger</BUS_Error2>
			</Processor_Configuration_OEM>
			<Broadcom_RAID_Controller_Status>
				<!--Broadcom-->
				<!--Supported content: Trigger/Skip-->
				<Broadcom1 Description="StorageController access degraded or unavailable" Severity="Critical/Information">Trigger</Broadcom1>
				<Broadcom2 Description="StorageController occurred bursting HDD lost" Severity="Critical/Information">Trigger</Broadcom2>
			</Broadcom_RAID_Controller_Status>
			<Broadcom_RAID_Controller_BBU_Status>
				<!--BBU-->
				<!--Supported content: Trigger/Skip-->
				<BBU1 Description="BBU low" Severity="Warning/Information">Trigger</BBU1>
				<BBU2 Description="BBU failed" Severity="Critical/Information">Trigger</BBU2>
				<BBU3 Description="BBU presence" Severity="Information/Warning">Trigger</BBU3>
			</Broadcom_RAID_Controller_BBU_Status>
			<Processor>
				<!--Processor-->
				<!--Supported content: Trigger/Skip-->
				<Processor1 Description="Thermal Trip has occurred" Severity="Critical/Information">Trigger</Processor1>
				<Processor2 Description="FRB1/BIST Failure" Severity="Critical/Information">Trigger</Processor2>
				<Processor3 Description="FRB2/Hang in POST Failure" Severity="Critical/Information">Trigger</Processor3>
				<Processor4 Description="FRB3/Processor Startup/Initialization Failure" Severity="Critical/Information">Trigger</Processor4>
				<Processor5 Description="SM BIOS 'Uncorrectable CPU-Complex Error'" Severity="Critical/Information">Trigger</Processor5>
				<Processor6 Description="Terminator Presence Detected" Severity="Information">Trigger</Processor6>
				<Processor7 Description="Machine check exception" Severity="Information">Trigger</Processor7>
			</Processor>
			<Management_Subsystem_Health>
				<!--Management-->
				<!--Supported content: Trigger/Skip-->
				<Management1 Description="Sensor access degraded or unavailable" Severity="Warning/Information">Trigger</Management1>
			</Management_Subsystem_Health>
			<Battery>
				<!--Battery-->
				<!--Supported content: Trigger/Skip-->
				<Battery1 Description="Battery low" Severity="Warning/Information">Trigger</Battery1>
				<Battery2 Description="Battery failed" Severity="Critical/Information">Trigger</Battery2>
				<Battery3 Description="Battery presence detected" Severity="Information">Trigger</Battery3>
			</Battery>
			<Memory>
				<!--Memory-->
				<!--Supported content: Trigger/Skip-->
				<Memory1 Description="Correctable ECC" Severity="Warning/Information">Trigger</Memory1>
				<Memory2 Description="Uncorrectable ECC" Severity="Critical/Information">Trigger</Memory2>
			</Memory>
			<OEM_DRIVER_SLOT>
				<!--OEM DRIVER SLOT-->
				<!--Supported content: Trigger/Skip-->
				<Drive_Fault1 Description="Drive Fault" Severity="Critical/Information">Trigger</Drive_Fault1>
				<!--Supported MBs: [Storage add-on]:X9SCD,X9SCE,X9SCFF+J27 & X11DP Systems-->
				<Drive_Fault2 Description="Drive Presence" Severity="Critical/Information">Trigger</Drive_Fault2>
				<Drive_Fault3 Description="Drive Fault" Severity="Critical/Information">Trigger</Drive_Fault3>
				<Drive_Fault4 Description="Drive Rebuild/Remap in progress" Severity="Information">Trigger</Drive_Fault4>
			</OEM_DRIVER_SLOT>
		</SEL_Trigger_Items>
		<HW_Event_Alert>
			<!--HW-related triggered events includes SDR and SEL events selected by SUM. Items examples are -->
			<!--for SDR, FAN Speed and Power Status. For SEL, CATERR, Uncorrectable ECC, Bus Fatal Error, etc..-->
			<Notification></Notification>
			<!--Supported Action: Enable/Disable-->
			<RecipientEmail></RecipientEmail>
			<!--If Notification is enabled, HW-related triggered events will be sent back to supermicro dept.-->
			<!--Default email is "hwevent_alert@supermicro.com", user can change this email under this content.-->
		</HW_Event_Alert>
	</Trigger_Items>
	<Recipient_Information>
		<!-- Recipient Information -->
		<!-- Example: <Recipient Name="John Doe" Role="Administrator">JohnDoe@example.com</Recipient> -->
		<Recipient Name="" Role=""></Recipient>
	</Recipient_Information>
	<Customer_Information>
		<!-- Customer Information -->
		<!-- Example: <Customer Name="Jane Doe" Company="Acme">JaneDoe@acme.com</Customer>-->
		<Customer Name="" Company=""></Customer>
	</Customer_Information>
	<Site_Location_Information>
		<!-- Site Location Information -->
		<!-- Example: -->
		<!-- <Company>Supermicro</Company><Address>980 Rock Avenue</Address><City>San Jose</City><State_Province>CA</State_Province><Zip>95131</Zip><Country>US</Country><Contact Name="Johnny" Role="Administrator">Johnny@example.com</Recipient> -->
		<Company></Company>
		<Address></Address>
		<City></City>
		<State_Province></State_Province>
		<Zip></Zip>
		<Country></Country>
		<Contact Name="" Role=""></Contact>
	</Site_Location_Information>
</ServiceCallsCfg>
