#Supermicro Update Manager 2.9.0 (2022/08/04) #File generated at 2025-09-17_00:48:16 #Please refer to SUM User's guide 'Format of BIOS Settings Text File' for usage. [Advanced|Boot Feature] Quiet Boot=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> AddOn ROM Display Mode=01 // *01 (Force BIOS), 00 (Keep Current) Bootup NumLock State=01 // *01 (On), 00 (Off) Wait For "F1" If Error=01 // 00 (Disabled), *01 (Enabled) INT19 Trap Response=01 // *01 (Immediate), 00 (Postponed) Re-try Boot=00 // *00 (Disabled), 01 (Legacy Boot), 02 (EFI Boot) Watch Dog Function=00 // *00 (Disabled), 01 (Enabled) Power Button Function=01 // *01 (Instant Off), 00 (4 Seconds Override) Restore on AC Power Loss=01 // 00 (Stay Off), 01 (Power On), *02 (Last State) [Advanced|CPU Configuration] Clock Spread Spectrum=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> Hyper-Threading (ALL)=00 // 01 (Disable), *00 (Enable) Cores Enabled=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> Monitor/Mwait=01 // 00 (Disable), *01 (Enable) Execute Disable Bit=01 // 00 (Disable), *01 (Enable) PPIN Control=01 // 00 (Unlock/Disable), *01 (Unlock/Enable) Hardware Prefetcher=01 // *01 (Enable), 00 (Disable) Adjacent Cache Prefetch=01 // *01 (Enable), 00 (Disable) DCU Streamer Prefetcher=01 // *01 (Enable), 00 (Disable) DCU IP Prefetcher=01 // *01 (Enable), 00 (Disable) Direct Cache Access (DCA)=02 // 00 (Disable), 01 (Enable), *02 (Auto) X2APIC=00 // *00 (Disable), 01 (Enable) AES-NI=01 // 00 (Disable), *01 (Enable) Intel Virtualization Technology=01 // 00 (Disable), *01 (Enable) [Advanced|CPU Configuration|Advanced Power Management Configuration] Power Technology=01 // 00 (Disable), *01 (Energy Efficient), 02 (Custom) Energy Performance Tuning=01 // 00 (Enable), *01 (Disable) Energy Performance BIAS setting.=07 // 00 (Performance), *07 (Balanced Performance), 08 (Balanced Power), 0F (Power) Energy Efficient Turbo=00 // *00 (Enable), 01 (Disable) [Advanced|CPU Configuration|Advanced Power Management Configuration|CPU P State Control] EIST (P-States)=01 // 00 (Disable), *01 (Enable) Turbo Mode=01 // 00 (Disable), *01 (Enable) P-State Coordination=00 // *00 (HW_ALL), 01 (SW_ALL), 02 (SW_ANY) [Advanced|CPU Configuration|Advanced Power Management Configuration|CPU HWPM State Control] Enable CPU HWPM=00 // *00 (Disable), 01 (HWPM NATIVE MODE), 02 (HWPM OOB MODE) Enable CPU Autonomous Cstate=00 // *00 (Disable), 01 (Enable) [Advanced|CPU Configuration|Advanced Power Management Configuration|CPU C State Control] Package C State Limit=03 // 00 (C0/C1 state), 01 (C2 state), 02 (C6(non Retention) state), *03 (C6(Retention) state) CPU C3 Report=00 // *00 (Disable), 01 (Enable) CPU C6 Report=01 // 00 (Disable), *01 (Enable) Enhanced Halt State (C1E)=01 // 00 (Disable), *01 (Enable) [Advanced|CPU Configuration|Advanced Power Management Configuration|CPU T State Control] ACPI T-States=01 // 00 (Disable), *01 (Enable) [Advanced|Chipset Configuration|North Bridge|IIO Configuration] EV DFX Features=00 // *00 (Disable), 01 (Enable) Snoop Response Hold Off=09 // Please enter the value in 2 hexadecimal digits. Default value is <<<09>>> [Advanced|Chipset Configuration|North Bridge|IIO Configuration|IIO1 Configuration] IOU2 (IIO1 PCIe Port 1)=FF // 00 (x4x4), 01 (x8), *FF (Auto) CPU SLOT3 PCI-E 3.0 X8=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) PORT 1B Link Speed=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) IOU0 (IIO1 PCIe Port 2)=FF // 00 (x4x4x4x4), 01 (x4x4x8), 02 (x8x4x4), 03 (x8x8), 04 (x16), *FF (Auto) CPU SLOT6 PCI-E 3.0 X16=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) PORT 2B Link Speed=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) PORT 2C Link Speed=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) PORT 2D Link Speed=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) IOU1 (IIO1 PCIe Port 3)=FF // 00 (x4x4x4x4), 01 (x4x4x8), 02 (x8x4x4), 03 (x8x8), 04 (x16), *FF (Auto) CPU SLOT4 PCI-E 3.0 X8=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) PORT 3B Link Speed=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) CPU SLOT5 PCI-E 3.0 X4=03 // 01 (Gen 1 (2.5 GT/s)), 02 (Gen 2 (5 GT/s)), *03 (Gen 3 (8 GT/s)) IIO1 IOU0 Non-Posted Prefetch=01 // 00 (Enable), *01 (Disable) IIO1 IOU1 Non-Posted Prefetch=01 // 00 (Enable), *01 (Disable) IIO1 IOU2 Non-Posted Prefetch=01 // 00 (Enable), *01 (Disable) [Advanced|Chipset Configuration|North Bridge|IIO Configuration|IOAT Configuration] Enable IOAT=01 // 00 (Disable), *01 (Enable) No Snoop=00 // *00 (Disable), 01 (Enable) Relaxed Ordering=00 // *00 (Disable), 01 (Enable) [Advanced|Chipset Configuration|North Bridge|IIO Configuration|Intel VT for Directed I/O (VT-d)] Intel VT for Directed I/O (VT-d)=01 // *01 (Enable), 00 (Disable) ACS Control=01 // *01 (Enable), 00 (Disable) Interrupt Remapping=01 // *01 (Enable), 00 (Disable) [Advanced|Chipset Configuration|North Bridge|Memory Configuration] Enforce POR=00 // *00 (Enabled), 01 (Disabled) Memory Frequency=00 // *00 (Auto), 05 (1333), 07 (1600), 09 (1867), 0B (2133), 0D (2400) Data Scrambling=02 // *02 (Auto), 00 (Disabled), 01 (Enabled) tCCD_L Relaxation=01 // 00 (Disabled), *01 (Auto) Enable ADR=01 // 00 (Disabled), *01 (Hardware Triggered ADR) Erase-Arm NVDIMMs=01 // 00 (Disabled), *01 (Enabled) Enable ADR = "ADR + NVDIMMs" Restore NVDIMMs=01 // 00 (Disabled), *01 (Enabled) Enable ADR = "ADR + NVDIMMs" Reset Trigger ADR=00 // *00 (Disabled), 01 (Enabled) S5 Trigger ADR=00 // *00 (Disabled), 01 (Enabled) DRAM RAPL Baseline=02 // 00 (Disable), 01 (DRAM RAPL Mode 0), *02 (DRAM RAPL Mode 1) Set Throttling Mode=02 // 00 (Disabled), *02 (CLTT) A7 Mode=01 // 00 (Disable), *01 (Enable) [Advanced|Chipset Configuration|North Bridge|Memory RAS Configuration] RAS Mode=00 // *00 (Independent), 01 (Mirror), 02 (Lockstep Mode) Memory Rank Sparing=00 // *00 (Disabled), 01 (Enabled) Multi Rank Sparing=04 // 01 (One Rank), 02 (Two Rank), 03 (Three Rank), *04 (Auto) Memory Rank Sparing = "Enabled" Patrol Scrub=01 // 00 (Disable), *01 (Enable) Patrol Scrub Interval=18 // Please enter the value in 2 hexadecimal digits. Default value is <<<18>>> Patrol Scrub = "Enable" Demand Scrub=01 // 00 (Disable), *01 (Enable) Device Tagging=00 // *00 (Disable), 01 (Enable) [Advanced|Chipset Configuration|South Bridge] Legacy USB Support=00 // *00 (Enabled), 01 (Disabled), 02 (Auto) XHCI Hand-off=01 // *01 (Enabled), 00 (Disabled) EHCI Hand-off=00 // *00 (Disabled), 01 (Enabled) Port 60/64 Emulation=01 // 00 (Disabled), *01 (Enabled) USB 3.0 Support=02 // 03 (Smart Auto), *02 (Auto), 01 (Enabled), 00 (Disabled) EHCI1=01 // 00 (Disabled), *01 (Enabled) EHCI2=01 // 00 (Disabled), *01 (Enabled) XHCI Pre-Boot Driver=01 // *01 (Enabled), 00 (Disabled) Azalia=02 // 00 (Disabled), 01 (Enabled), *02 (Auto) Azalia PME Enable=00 // *00 (Disabled), 01 (Enabled) Azalia = "Enabled" or Azalia = "Auto" SATA Frozen=01 // 00 (Disabled), *01 (Enabled) [Advanced|SATA Configuration] SATA Controller=01 // 00 (Disabled), *01 (Enabled) Configure SATA as=01 // 00 (IDE), *01 (AHCI), 02 (RAID) SATA Controller = "Enabled" SATA Support Aggressive Link Power Mgmt=00// *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" SATA RAID Option ROM/UEFI Driver=02 // 00 (Disabled), 01 (EFI), *02 (Legacy) Configure SATA as = "RAID" Port 0 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 0 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 0 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) Port 1 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 1 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 1 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) Port 2 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 2 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 2 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) Port 3 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 3 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 3 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) Port 4 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 4 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 4 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) Port 5 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 5 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure SATA as = "AHCI" or Configure SATA as = "RAID" Port 5 SATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) [Advanced|sSATA Configuration] sSATA Controller=01 // *01 (Enabled), 00 (Disabled) Configure sSATA as=01 // 00 (IDE), *01 (AHCI), 02 (RAID) sSATA Controller = "Enabled" sSATA Support Aggressive Link Power Mgmt=00// *00 (Disabled), 01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" sSATA RAID Option ROM/UEFI Driver=02 // 00 (Disabled), 01 (EFI), *02 (Legacy) Configure sSATA as = "RAID" SATA/sSATA RAID Boot Select=01 // 00 (SATA Controller), *01 (sSATA Controller), 02 (Both) sSATA Port 0 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" sSATA Port 0 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" Port 0 sSATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) sSATA Port 1 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" sSATA Port 1 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" Port 1 sSATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) sSATA Port 2 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" sSATA Port 2 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" Port 2 sSATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) sSATA Port 3 Hot Plug=01 // 00 (Disabled), *01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" sSATA Port 3 Spin Up Device=00 // *00 (Disabled), 01 (Enabled) Configure sSATA as = "AHCI" or Configure sSATA as = "RAID" Port 3 sSATA Device Type=00 // *00 (Hard Disk Drive), 01 (Solid State Drive) [Advanced|PCIe/PCI/PnP Configuration] PCI PERR/SERR Support=00 // *00 (Disabled), 01 (Enabled) Above 4G Decoding=00 // *00 (Disabled), 01 (Enabled) SR-IOV Support=00 // *00 (Disabled), 01 (Enabled) Maximum Payload=37 // *37 (Auto), 00 (128 Bytes), 01 (256 Bytes) Maximum Read Request=37 // *37 (Auto), 00 (128 Bytes), 01 (256 Bytes), 02 (512 Bytes), 03 (1024 Bytes), 04 (2048 Bytes), 05 (4096 Bytes) ASPM Support=00 // *00 (Disabled), 37 (Auto) MMIOHBase=00000000 // *00000000 (56 TB), 00000001 (40 TB), 00000002 (24 TB), 00000003 (3 TB), 00000004 (2 TB), 00000005 (1 TB) MMIO High Size=00000000 // *00000000 (256 GB), 00000001 (128 GB), 00000002 (512 GB), 00000003 (1024 GB) MMCFG BASE=00000000 // *00000000 (Auto), 00000003 (0x30000000), 00000004 (0x40000000), 00000006 (0x60000000), 00000008 (0x80000000), 00000009 (0x90000000), 0000000A (0xA0000000), 0000000B (0xB0000000), 0000000C (0xC0000000), 0000000D (0xD0000000), 0000000E (0xE0000000) PCH SLOT1 PCI-E 2.0 X2(IN X8) OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) PCH SLOT2 PCI-E 2.0 X4(IN X8) OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) CPU SLOT3 PCI-E 3.0 X8 OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) CPU SLOT4 PCI-E 3.0 X8 OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) CPU SLOT5 PCI-E 3.0 X4(IN X8) OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) CPU SLOT6 PCI-E 3.0 X16 OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) Onboard LAN OPROM Type=00 // *00 (Legacy), 01 (EFI) Onboard LAN1 OPROM=01 // 00 (Disabled), *01 (PXE), 02 (iSCSI) Onboard LAN2 OPROM=00 // *00 (Disabled), 01 (PXE) Onboard Video OPROM=01 // 00 (Disabled), *01 (Legacy), 02 (EFI) VGA Priority=01 // *01 (Onboard), 02 (Offboard) Network Stack=01 // 00 (Disabled), *01 (Enabled) Ipv4 PXE Support=01 // 00 (Disabled), *01 (Enabled) Network Stack = "Enabled" Ipv6 PXE Support=00 // *00 (Disabled), 01 (Enabled) Network Stack = "Enabled" [Advanced|Super IO Configuration|Serial Port 1 Configuration] Serial Port 1=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> Change Port 1 Settings=00 // *00 (Auto), 01 (IO=3F8h; IRQ=4;), 02 (IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;), 03 (IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;), 04 (IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;), 05 (IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;) [Advanced|Super IO Configuration|Serial Port 2 Configuration] Serial Port 2=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> Change Port 2 Settings=00 // *00 (Auto), 01 (IO=2F8h; IRQ=3;), 02 (IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;), 03 (IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;), 04 (IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;), 05 (IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;) Serial Port 2 Attribute=03 // *03 (SOL), 01 (COM) [Advanced|Serial Port Console Redirection] COM1 Console Redirection=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> COM2/SOL Console Redirection=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> EMS Console Redirection=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> [Advanced|Serial Port Console Redirection|COM1 Console Redirection Settings] COM1 Terminal Type=01 // 00 (VT100), *01 (VT100+), 02 (VT-UTF8), 03 (ANSI) COM1 Bits per second=07 // 03 (9600), 04 (19200), 05 (38400), 06 (57600), *07 (115200) COM1 Data Bits=08 // 07 (7), *08 (8) COM1 Parity=01 // *01 (None), 02 (Even), 03 (Odd), 04 (Mark), 05 (Space) COM1 Stop Bits=01 // *01 (1), 03 (2) COM1 Flow Control=00 // *00 (None), 01 (Hardware RTS/CTS) COM1 VT-UTF8 Combo Key Support=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> COM1 Recorder Mode=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> COM1 Resolution 100x31=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> COM1 Legacy OS Redirection Resolution=01// 00 (80x24), *01 (80x25) COM1 Putty KeyPad=01 // *01 (VT100), 02 (LINUX), 04 (XTERMR6), 08 (SCO), 10 (ESCN), 20 (VT400) COM1 Redirection After BIOS POST=00 // *00 (Always Enable), 01 (BootLoader) [Advanced|Serial Port Console Redirection|COM2/SOL Console Redirection Settings] SOL Terminal Type=01 // 00 (VT100), *01 (VT100+), 02 (VT-UTF8), 03 (ANSI) SOL Bits per second=07 // 03 (9600), 04 (19200), 05 (38400), 06 (57600), *07 (115200) SOL Data Bits=08 // 07 (7), *08 (8) SOL Parity=01 // *01 (None), 02 (Even), 03 (Odd), 04 (Mark), 05 (Space) SOL Stop Bits=01 // *01 (1), 03 (2) SOL Flow Control=00 // *00 (None), 01 (Hardware RTS/CTS) SOL VT-UTF8 Combo Key Support=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> SOL Recorder Mode=00 // Please enter the value in 2 hexadecimal digits. Default value is <<<00>>> SOL Resolution 100x31=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> SOL Legacy OS Redirection Resolution=01 // 00 (80x24), *01 (80x25) SOL Putty KeyPad=01 // *01 (VT100), 02 (LINUX), 04 (XTERMR6), 08 (SCO), 10 (ESCN), 20 (VT400) SOL Redirection After BIOS POST=00 // *00 (Always Enable), 01 (BootLoader) [Advanced|Serial Port Console Redirection|EMS Console Redirection Settings] Out-of-Band Mgmt Port=00 // *00 (COM1), 01 (SOL/COM2) EMS Terminal Type=02 // 00 (VT100), 01 (VT100+), *02 (VT-UTF8), 03 (ANSI) EMS Bits per second=07 // 03 (9600), 04 (19200), 06 (57600), *07 (115200) EMS Flow Control=00 // *00 (None), 01 (Hardware RTS/CTS), 02 (Software Xon/Xoff) [Advanced|ACPI Settings] WHEA Support=01 // 00 (Disabled), *01 (Enabled) High Precision Event Timer=01 // 00 (Disabled), *01 (Enabled) PCI AER Support=00 // *00 (Disabled), 01 (Enabled) [Advanced|Trusted Computing] Security Device Support=01 // 00 (Disabled), *01 (Enabled) SHA-1 PCR Bank=01 // 00 (Disabled), *01 (Enabled) SHA256 PCR Bank=02 // 00 (Disabled), *02 (Enabled) TPM State=00 // *00 (Disabled), 01 (Enabled) Pending Operation=00 // *00 (None), 05 (TPM Clear) Platform Hierarchy=01 // 00 (Disabled), *01 (Enabled) Storage Hierarchy=01 // 00 (Disabled), *01 (Enabled) Endorsement Hierarchy=01 // 00 (Disabled), *01 (Enabled) TPM2.0 UEFI Spec Version=02 // 01 (TCG_1_2), *02 (TCG_2) PH Randomization=00 // *00 (Disabled), 01 (Enabled) Device Select=02 // 00 (TPM 1.2), 01 (TPM 2.0), *02 (Auto) TXT Support=00 // *00 (Disabled), 01 (Enabled) [Event Logs|Change SMBIOS Event Log Settings] SMBIOS Event Log=01 // 00 (Disabled), *01 (Enabled) Runtime Error Logging Support=01 // 00 (Disable), *01 (Enable) Memory Corrected Error Enabling=00 // *00 (Disable), 01 (Enable) Memory Corr. Error Threshold=0064 // Please enter the value in 4 hexadecimal digits. Default value is <<<0064>>> PCI-Ex Error Enable=00 // *00 (No), 01 (Yes) Erase Event Log=00 // *00 (No), 01 (Yes, Next reset), 02 (Yes, Every reset) When Log is Full=00 // *00 (Do Nothing), 01 (Erase Immediately) Log System Boot Event=00 // 01 (Enabled), *00 (Disabled) MECI=01 // Please enter the value in 2 hexadecimal digits. Default value is <<<01>>> METW=3C // Please enter the value in 2 hexadecimal digits. Default value is <<<3C>>> [IPMI|System Event Log] SEL Components=01 // 00 (Disabled), *01 (Enabled) Erase SEL=00 // *00 (No), 01 (Yes, On next reset), 02 (Yes, On every reset) When SEL is Full=00 // *00 (Do Nothing), 01 (Erase Immediately) [Boot] Setup Prompt Timeout=0001 // Please enter the value in 4 hexadecimal digits. Default value is <<<0001>>> Boot Mode Select=02 // 00 (LEGACY), 01 (UEFI), *02 (DUAL) HDD special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) CD/DVD special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) USB Hard Disk special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) USB CD/DVD special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) USB Key special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) USB Floppy special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) Network special boot instance=00 // *00 (Boot Option #1), 01 (Boot Option #2), 02 (Boot Option #3), 03 (Boot Option #4), 04 (Boot Option #5), 05 (Boot Option #6), 06 (Boot Option #7), 07 (Boot Option #8), 08 (Boot Option #9), 09 (Boot Option #10), 0A (Boot Option #11), 0B (Boot Option #12), 0C (Boot Option #13), 0D (Boot Option #14), 0E (Boot Option #15), 0F (Boot Option #16) UEFI Boot Order #1=0000 // *0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #2=0001 // 0000 (Hard Disk), *0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #3=0002 // 0000 (Hard Disk), 0001 (CD/DVD), *0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #4=0003 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), *0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #5=0004 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), *0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #6=0005 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), *0005 (USB Floppy), 0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #7=0006 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), *0006 (Network), 0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" UEFI Boot Order #8=0007 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), *0007 (UEFI AP), 0008 (Disabled) Boot Mode Select = "UEFI" Legacy Boot Order #1=0000 // *0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #2=0001 // 0000 (Hard Disk), *0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #3=0002 // 0000 (Hard Disk), 0001 (CD/DVD), *0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #4=0003 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), *0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #5=0004 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), *0004 (USB Key), 0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #6=0005 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), *0005 (USB Floppy), 0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Legacy Boot Order #7=0006 // 0000 (Hard Disk), 0001 (CD/DVD), 0002 (USB Hard Disk), 0003 (USB CD/DVD), 0004 (USB Key), 0005 (USB Floppy), *0006 (Network), 0007 (Disabled) Boot Mode Select = "LEGACY" Dual Boot Order #1=000E // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), *0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #2=0008 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), *0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #3=000A // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), *000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #4=000B // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), *000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #5=000C // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), *000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #6=000D // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), *000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #7=0009 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), *000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #8=0000 // *0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #9=0001 // 0000 (UEFI Hard Disk), *0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #10=0002 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), *0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #11=0003 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), *0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #12=0004 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), *0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #13=0005 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), *0005 (UEFI USB Floppy), 0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #14=0006 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), *0006 (UEFI Network), 0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL" Dual Boot Order #15=0007 // 0000 (UEFI Hard Disk), 0001 (UEFI CD/DVD), 0002 (UEFI USB Hard Disk), 0003 (UEFI USB CD/DVD), 0004 (UEFI USB Key), 0005 (UEFI USB Floppy), 0006 (UEFI Network), *0007 (UEFI AP), 0008 (Hard Disk), 0009 (CD/DVD), 000A (USB Hard Disk), 000B (USB CD/DVD), 000C (USB Key), 000D (USB Floppy), 000E (Network), 000F (Disabled) Boot Mode Select = "DUAL"